Hot
XE910-4G
• Power Socket (PWR, GND, RESET)
• D-Type 9-Pin RS232 Connector
• Mini USB Connector (ESD protection for USB 2.0)
• 2×4 GPIO Socket
• RS485 – Transceiver with AutoDirection Control
• 2 Output – 2 Input – 1 Analog Input
• Cellular Antenna Connector (SMA-F 50Ohm)
• Rx Diversity Antenna Connector (SMA-F 50Ohm)
• On board Push-Push Sim Card Holder
• 2 operating status LED’s (Power / Status)
Döküman İndir
- Description
- Doküman
Description
| Interfaces | Electrical & Sensitivity |
| Power Socket (PWR, GND, RESET) | Supply voltage: 9–35VDC @ 1.2A min |
| D-Type 9-Pin RS232 Connector | Battery: Li-Ion 3.7V 960mAh (Optional) |
| (RS-232 transceivers with integrated ESD protection) | Output power |
| Mini USB Connector (ESD protection for USB 2.0 interfaces) | Class 4 (2 W, 33 dBm) @ GSM 850/900 |
| 2×4 GPIO Socket | Class 1 (1 W, 30 dBm) @ GSM 1800/1900 |
| RS485 – Transceiver with AutoDirection Control | Class E2 (0.5 W, 27 dBm)@ EDGE 850/900 |
| 2 Output (Relay Driver Max 12V @ 150mA) | Class E2 (0.4 W, 26 dBm)@ EDGE 1800/1900 |
| 2 Input (Optical isolator 9-24V DC) | Class 3 (0.25 W, 24 dBm) @ UMTS |
| 1 Analog Input (0-5V DC) | Class 3 (0.2 W, 23 dBm) @ LTE |
| Cellular Antenna Connector (SMA-F 50Ohm) | Cellular Sensitivity |
| Rx Diversity Antenna Connector (SMA-F 50Ohm) | 111 dBm @ UMTS |
| On board Push-Push Sim Card Holder | 109 dBm @ GSM 850/900 MHz |
| 2 operating status LED’s | 110 dBm @ DCS1800/PCS1900 MHz |
| Power / Status | |
| Cellular Features | Software |
| 4G bands (MHz) | AppZone application resources |
| B1(2100),B3(1800),B7(2600),B8(900),B20(800) | Programming language: C |
| 3G bands (MHz) | IDE: Eclipse |
| B2(2100),B8(900) | Dedicated File System: 5 MB |
| 2G bands (MHz) | Separate App. RAM Space: 2 MB |
| B3(1800),B8(900) | Data |
| LTE FDD Cat.4, 3GPP release 9 compliant | LTE |
| SIM application Tool Kit 3GPP TS 51.014 | Uplink up to 50 Mbps |
| Serial port multiplexer 3GPP TS27.010 | Downlink up to 100 Mbps |
| SMS over IMS | HSPA+ |
| Builtin UDP/TCP/FTP/SMTP stack | Uplink up to 5.76 Mbps |
| Control via AT commands according to | Downlink up to 42.0 Mbps |
| 3GPP TS27.005, 27.007 and customized | UMTS |
| Telit AT commands | Uplink/Downlink up to 384 kbps |
| Rx Diversity and MIMO DL 2×2 | Mechanical / Environmental |
| Voice and SMS | Dimensions 85 x 80 x 30 mm |
| Standard and extended AT command set | Weight: 140 grams (with battery) |
| IP stack with TCP and UDP protocol | Extended temperature range: |
| -40°C to +85°C (Operational) |
XE910-4G
